The 1732 and 1734 three-phase electrical energy loggers were designed to be able to introduce a new simplicity to discovering sources of electrical energy waste from the service entrance to individual circuits.
The instruments allow you to automatically capture and log voltage, current, power, power factor, energy and associated values. You can then access and share data remotely with your team via the Fluke Connect® app so you can maintain safer working distances and make critical decisions in real-time, reducing the need for protective equipment, site visits and check-ins. The Fluke 1734 has this module already added whereas it is an optional add on if required for the Fluke 1732.
For full details of the features, please see the data sheet.
- Key measurements - Automatically capture and log voltage, current, power, power factor, energy and associated values
- Fluke connect compatible* - View data locally on the instrument, via Fluke Connect mobile app and desktop software or through your facilities’ WiFi infrastructure. *Not all models are available in all countries.
- Convenient instrument powering - Power instrument directly from the measured circuit
- Highest safety rating in the industry - 600 V CAT IV/1000 V CAT III rated for use at the service entrance and downstream
For full technical details, please see the data sheet.
Voltage range 100 V to 500 V using safety plug input when powering from the measurement circuit
Power consumption Maximum 50 VA (max. 15 VA when powered using IEC 60320 input)
Efficiency ≥ 68.2 % (in accordance with energy efficiency regulations)
Maximum no-load consumption < 0.3 W only when powered using IEC 60320 input
Mains power frequency 50/60 Hz ± 15 %
Battery Li-ion 3.7 V, 9.25 Wh, customer-replaceable
Resolution 16-bit synchronous sampling
Sampling frequency 10.24 kHz at 50/60 Hz, synchronized to mains frequency
Data storage Internal flash memory (not user replaceable)
Memory size Typical 10 logging sessions of 8 weeks with 1-minute intervals and 500 events