Chauvin Arnoux CA8334 - 3 000 A | Power analyser Hire

Contact Instrument Solutions

Designed for verification and maintenance departments in industrial or administrative buildings, the Qualistar CA8334 enables the user to obtain an instant picture of the main characteristics of electrical network quality.

Handy and very compact, this instrument also gives numerous calculated values and several processing functions in line with current standards such as EN 50160, IEC 61000-4-15, IEC 61000-4-30 and IEC 61000-4-7.


  • Colour LCD screen for graphic display
  • 3 structured display modes: observation, diagnosis, monitoring
  • Complete three-phase analysis: voltage, current, power / energy, harmonics (up to 50th order), flicker, measurement of transients, alarm trigger
  • Processing of data via PC software QualistarView or DataViewer Pro
  • Recording of 12 screens
  • Compliant with IEC 61010-1, 600V Cat.IV
  • Optional low current CT sets available as an optional accessory.

QualistarView software

  • Complete instrument configuration via software: setup, recording and alarms modes.
  • Recorded and alarm data processing.
  • Graphic representation of data in Windows operating environment
  • Data analysis in compliance with EN 50160 standard
  • Screen printout and transient transfers in BMP format
  • 3D representation of harmonics
  • Data to spread sheet transfer (Excel)


General : The Instrument Solutions hire model comes with 3 000 A CT's which are rated for use between 10 and 3000 A.  Optional low current CT's are available as an accessory.

Power supply      Mains 110 V and 230 V with a NiMH (9.6 V) rechargeable battery

Operating temperature      0 to +50 °C

Storage temperature      -40 °C to +70 °C

Standards      EN IEC 61010, 600 V cat. III, double insulation for inputs and outputs

Dimensions (L x W x H)      180 x 55 x 240 mm

Weight      1.5 kg with battery

Frequency range      40 - 70 Hz

Accuracy voltage/current      ± 0.5 % Power: ± 1 %

Accuracy power factor ± 0.01

Accuracy frequency      ± 0.01 Hz

Accuracy THD (total harmonic distortion)      ± 1 % L ± 2 pts

Accuracy energy      ± 1 %

Sampling frequency      12.8 kHz / channel at 50 Hz

Memory      4 Mbytes

Support documents

  • Download
  • Category
  • File type
  • Download
Chauvin Arnoux CA8334 data sheet.pdf Chauvin Arnoux CA8334 data sheet
Technical document
File type
Adobe Acrobat
Download (756 KB)
Chauvin Arnoux CA8334 user manual.pdf Chauvin Arnoux CA8334 user manual
Technical document
File type
Adobe Acrobat
Download (1 MB)
Chauvin Arnoux DataView Chauvin Arnoux DataView software
Support documents
File type
Archive file
Download (770 MB)
Chauvin Arnoux DataView software BSRIA data sheet.pdf Chauvin Arnoux DataView software BSRIA data sheet
Technical document
File type
Adobe Acrobat
Download (4 MB)

Common customer questions & answers

QQuestion How do I know if the unit is recording data?
AAnswer Push the cassette button this will enable you to view the status in real time.
QQuestion The unit was running but did not record data on i.e. volts, amps, etc., what’s wrong?
AAnswer In set-up of the logger you have to make sure you highlight the diamond below the parameter that is to be recorded i.e. volts amps etc., then the return key to store.
QQuestion How do I set the unit up to record transients?
AAnswer Go to main menu using the six purple buttons, press the top left hand button (transients logging), set the time, date and enter the number 50 to set the V & A threshold levels.