Elcomponents SPC Pro hire kit | Energy analyser

Contact Instrument Solutions

Elcomponents SPC Pro c/w 3 x flex 2 to 2000 A CTs, USB download cable mains lead, PowerPackPro software and case

The Elcomponents SPC Pro is a non-invasive single & 3 phase data logger, and it makes the job simpler and safer than ever before. Based on the well-proven "3 currents, 1 voltage" hook-up, the only voltage connection it needs is a standard 13A wall socket.

Current measurement is via fully isolated flexible hoop CTs which makes the SPC Pro incredibly safe to use. The unit is also very easy to set up and connect and requires no detailed knowledge of electrical systems from the operator. It is light and compact, but also tough in a water resistant case.

Features

Measurement performance is second-to-none in its class, utilising an automatic ‘auto range' feature which maintains remarkable accuracy from levels as low as 2A, all the way to 2000A - with no manual range setting required. Best of all, the sophisticated on-board electronics and dedicated PC software use a unique Elcomponent algorithm to ensure that power and energy (kWh) values are correctly calculated every time!

Programming and download is via the PowerPackPro software, and hi speed USB connection, so data transfer is fast despite the large memory capacity.

The SPC Pro looks the part too... The sleek piano black case is complemented by a cool blue LCD display, the high quality AmpflexTM flex hoop CTs are connected to the unit via a neatly finished single cable so tangled wires are banished, and the kit is supplied in a bespoke zip case to keep everything tidy.

The SPCPro is a professional-grade instrument for the measurement and logging of three-phase and single phase electrical loads. It is able to measure the following parameters:

  • Voltage amplitude x 1
  • Current amplitude x 3
  • Current phase angle* x 3       *Referenced to the measured voltage
  • From the above data, the following parameters are presented:  V, I, PF, kW, kWh, kVArh, cost and CO2 emissions (kg) via the instrument’s dedicated software package ‘PowerPackPro’.

NOTE: any data stored in logger memory is erased when a new survey is started.  

PowerPackPro software is also available to download online: https://spcloggers.com/downloads/ 

Elcomponents SPC Pro 2 hire kit | Energy analyser
Elcomponents SPC Pro 2 hire kit | Energy analyser
Elcomponents SPC Pro 2 c/w 3 x 2 to 2000 A flex CTs, USB download cable, USB stick, mains lead, PowerPackPro software, manual, case and calibration certificate.

Support documents

  • Download
  • Category
  • File type
  • Download
Download
Elcomponents PowerPackPro software.msi Elcomponents PowerPackPro software
Category
Technical document
File type
msi
Download (9 MB)
Download
Elcomponents SPC Pro data sheet.pdf Elcomponents SPC Pro data sheet
Category
Technical document
File type
Adobe Acrobat
Download (1 MB)
Download
Elcomponents SPC Pro quick start guide.pdf Elcomponents SPC Pro quick start guide
Category
Technical document
File type
Adobe Acrobat
Download (464 KB)
Download
Elcomponents SPC Pro user manual.pdf Elcomponents SPC Pro user manual
Category
Technical document
File type
Adobe Acrobat
Download (1 MB)

Common customer questions & answers

QQuestion On the SPC Pro are the CT's detachable from the base unit?
AAnswer No, this feature is only available on the SPC Pro2 models - See separate entry within the website.
QQuestion Will the SPC Pro run on batteries or does it require 240 volt mains power?
AAnswer The SPC Pro requires plug-in 240 volt mains voltage to run correctly. Alternatively the SPC Pro 2 units have an internal battery that can be used for no voltage logging for up to 2 weeks if mains power is not available.
QQuestion I don't have a CD drive - how can I download PowerPackPro for the SPC Pro unit?
AAnswer The software is available to download online from the manufacturers website: https://www.spcloggers.com/downloads/
Look for PowerPackPro under the SPC Pro2 unit.