Close

Are you visiting bsria.com from outside your region? Visit your regional site for more relevant services and pricing.

Retrotec 451 110V kit

Contact Instrument Solutions

Overview

The Retrotec 450 series are small yet high power positive and negative duct leakage testers which can test systems to pressures beyond 5 kPa. Used with the DM32-20 smart test gauge with touchscreen LCD, this system is intuitive to setup and use.

With a fan weighing just 9 kg, and the full kit in its case weighing only 16 kg, this duct leakage tester is a truly portable system allowing the engineer access to test points other units will not allow.

Products are available in 110 V and 230 V versions with DM32-20 gauges. The 451 (hire only) does not have Wi-Fi capabilities. The 452 model has Wi-Fi connectivety.

Features

  • Fast automatic documentation with simple to use software that creates custom reports with your company logo. (June 16 - Free of charge Beta version of the software is available to download only from www.retrotec.com only)
  • The 450 series DucTesters can be run directly via the DM32-20 smart gauge which contains all the formula needed to calculate the applicable test standard leakage parameters .
  • Wireless capability enables the fan to be run via your iPhone or Android device

DucTester system configuration

All UK Retrotec DucTestrers come complete with the following:

Model 450 fan set with flow rings ranged 74/47/29/18/11/7 and 3, power lead, 4 m 100 mm diameter flexible ducting, flex duct adapter, DM32-20 gauge set including tubing, accessory kit & fan control umbilical chord, batteries, charger and case, duct flange and manuals.

Important note

The Instrument Rental models are all the 110 V 451 versions and DM32-20 gauges are without Wi-Fi capabilities.

Technical

Fan performance The nominal performance figure for the 450 fan unit are as follows:-

  • 144 l/s at 250 Pa
  • 143 l/s at 500 Pa
  • 142 l/s at 1000 Pa
  • 141 l/s at 1500 Pa
  • 140 l/s at 2000 Pa
  • 138 l/s at 2500 Pa

N.B. The lowest measurable flow rate is 0.14 l/s

Maximum test pressure 15.5 kPa

Voltage / current rating 110 V AC / 15.5 A or 240 V / 8.5 A

Fan control Speed control knob on fan housing, set fan speed to a % via the gauge or via a PC

Fan power options 110 V AC, 15.5 A or 240 V AC , 8.5 A

Measurement units l/s, m3/s, m3/h, l/(s m2), m3/(s m2)

Size 35 cm x 35 cm x 66 cm

Weight 16 kg system total

Duct connection size 4 m of 100 mm diameter flexiduct is supplied as standard along with a square flanged duct plate for temporary fitting the the system under test

Warranty 2 years on all parts except the ducting

Support documents

  • Download
  • Category
  • File type
  • Download
Download
Retrotec 450 series DucTester data sheet.pdf Retrotec 450 series DucTester data sheet
Category
Technical document
File type
Adobe Acrobat
Download (365 KB)
Download
Retrotec 450 series DucTester quick user guide.pdf Retrotec 450 series DucTester quick user guide
Category
Technical document
File type
Adobe Acrobat
Download (3 MB)
Download
Retrotec 450 series DucTester user manual.pdf Retrotec 450 series DucTester user manual
Category
Technical document
File type
Adobe Acrobat
Download (2 MB)
Download
Retrotec DM32 digital gauge user manual.pdf Retrotec DM32 digital gauge user manual
Category
Technical document
File type
Adobe Acrobat
Download (7 MB)

Common customer questions & answers

QQuestion There is no power on the construction site so can this unit be run off a generator?
AAnswer No. If you run this item off a generator it is possible to damage the fan motor.
QQuestion There is no power on the construction site so can this unit be run off a generator?
AAnswer No. If you run this item off a generator it is possible to damage the fan motor.