The 8038 PortaCount Pro+ respirator fit tester is used for the testing of gas masks, SCBA's, respirators including disposables ( P1 and P2 versions).
Features
This fit tester can quantitatively fit test all types of respirators—gas masks, SCBAs, respirators, even P1 and P2 disposable (filtering-facepiece) respirators. The PortaCount Pro+ respirator fit tester eliminates the guesswork associated with tedious and error-prone qualitative fit test methods.
Benefits
- Fit test ANY tight-fitting respirator including N95, P2 and P1 disposables
- Faster N95 fit testing time -- down from 10:24 seconds to 7:15 seconds
- Greater simplicity with the built-in N95 Companion™ technology
- Stand alone operation - no external computer required
- Use with external computer to generate reports and print fit test cards
- Able to perform N95 fit testing with much lower ambient particle concentrations
- Colour touch screen
- OSHA-compliant for all respirators, including N95
- Measures fit factors greater than 10,000
- Switch between different respirator types in under a minute
- Automates fit testing with FitPro™ Fit test software
Technical
Fit factor range 1 to greater than 10,000 & 1 to 200 for P1 and P2 respirators
Typical fit factor accuracy ± 10 % of reading
Respirator facepieces that can be fit tested Full-face elastomeric, half-face elastomeric and EN series P1 P2 and P3 filtering facepiece
Fit factor measurement Direct measurement of fit factor (Cout/Cin) - Mask leakage is measured simultaneously while test subject moves and breathes
Dimensions (HWD) 17 cm x 22 cm x 24 cm
Weight Unit only 2.7 kg
Power Autosensing 100 to 250 VAC, 50 to 60 Hz
Flow rate Sample 350 cm3/min. Total 1000 cm3/min (nominal)
Temperature range Operation 0 to 38 °C. Storage - 40 to 70 °C
Alcohol Hours per charge 6 hours at 21 °C (70 °F). Alcohol Type 99.5 % + reagent grade isopropyl
Carrying case Dimensions (HWD) 23 cm x 36 cm x 53 cm
Pass/Fail setting User selectable: 0 to 10,000
Factory recalibration interval One year
Warranty Two years on workmanship and materials
Minimum PC hardware requirements for FITPRO fit test software Microsoft® Windows® XP and Windows Vista® software Windows 7 (32 - 64 bit) software
IMPORTANT NOTE - Instrument Hire Model
Instrument Hire model is available on a 3 day or weekly rental period, and is supplied with x25 No. N95 face piece adapters, 40mm adapter kit (TSI Part No. 8025-CEN - Fits most face pieces that use standard 40 mm DIN threaded fit) as well as the 3M adapter kit (TSI Part No. 8025-16 - For 3M masks with removable filters with a bayonet connection). For additional information or alternative face mask types please call the Hire team on 01344 459314 for availability.