The Spirit 900 is well suited to applications where continuous, high smoke output is required, since it utilises a modular peristaltic pump system rather than conventional, low cost piston pumps.
Using a protected solid state relay for heater switching at zero volts, an IP65 rated digital microprocessor temperature control displaying actual and set temperatures, and splash proof switches and indicators the Spirit 900 does not compromise in the quality of the components used within the system.
The temperature of the heat exchanger is PID controlled so that the heat is pulsed as main set point is reached, minimising overshoot and undershoot.
The pump draws Smoke Fluid A (persistent) or Smoke Fluid B (quickly dispersing) from its integral 2 litre reservoir (or an external reservoir if specified), forcing it into Concept's unique precision machined heat exchanger, where it is vaporised.
On exiting the heat exchanger, the vapour condenses to form dense, white, non toxic smoke, with an incredibly consistent, and small particle size of 0.2 to 0.3 micron mass median diameter.
All Spirit 900's are supplied with a 5 metre remote control.
All Instrument Solutions Hire models are provided as standard with a 2 L container of smoke fluid type A (persistent). Additional 5 L containers can be obtained when hired on a sale-or-return basis of not used. Hire models are also supplied with a 75 mm duct adaptor and a 3 m (minimum) length of flexible ducting.
Heat exchanger power 2200 W
Power supply 110 V, 50 / 60 Hz
Warm up time from cold 5 minutes
Duration of aerosol at maximum output 40 minutes
Smoke output 0 to 420 m3 / min @ 1.5 m visibility
Particle size 0.2 to 0.3 micron, mass median diameter
Size 55 cm x 23 cm x 29 cm
Smoke Hang Time Index (HTI) Fluid A - HTI 4 - 6 / 1.25 - 1.5 hours, Fluid B HTI 0.17 / 2 - 4 minutes