Close

Are you visiting bsria.com from outside your region? Visit your regional site for more relevant services and pricing.

TSI 9350 | Particle counter

Contact Instrument Solutions

The TSI AEROTRAK portable particle counters models 9350 and 9550 offer best-in-class features and versatility. Both models provide a 50 l/min flow with either 0.3 or 0.5 μm sensitivity. Perform ISO 14644-1 classifications and complete certifications of EU GMP facilities, by sampling 1 m3 of air in just 20 minutes. Compatible with TSI’s accurate ventilation probes that measure air velocity/temperature, these products provide you with a complete solution for your certification needs. Also an operating temperature range of 2 oC to 35 oC makes the unit ideal for use in pharmaceutical cold storage applications.

Features

These particle counters can generate pass/fail reports for ISO 14644-1, EU GMP Annex 1, and FS209E. These product can be used as a stand-alone particle counter. Both models comply with all the stringent requirements set forth in ISO 21501-4. They are calibrated with NIST traceable PSL spheres using TSI’s world-class Classifier and Condensation Particle Counters, the recognized standard for particle measurements.

Instrument is compatible for use with TrakPro Lite Secure software as an optional extra which enables data transfer in a 21 CFR Part 11 compliant manner.

Overview

  • 9350 particle counter: 0.3 to 25 μm
  • 9550 particle counter: 0.5 to 25 μm
  • Up to six channels of simultaneous data
  • 50 l/min flow rate
  • Complies with all requirements of ISO 21501-4
  • 10,000 sample record storage, 999 locations
  • Ethernet and USB outputs
  • Industry’s loudest audible alarm
  • Easy icon-driven touch screen operation
  • Reports for ISO-14644-1, EU GMP Annex 1, and FS209E
  • Allows storage and recall of specific tests/recipes
  • Displays up to three environmental parameters
  • Stainless steel enclosure
  • Lightweight
  • Clean room classification down to ISO Class 2

Technical

Particle channel sizes 

  • 9350: 0.3, 0.5, 1.0, 2.0 3.0, 5.0 μm, with additional channel sizes available
  • 9550: 0.5, 0.7, 1.0, 3.0, 5.0, 10.0 μm, with additional channel sizes available

Size resolution     < 15 % @ 0.5 μm (per ISO 21501-4)

Counting efficiency

  • 9350: 50 % at 0.3 μm; 100 % for particles > 0.45 μm (per ISO 21501-4 and JIS)
  • 9550: 50 % at 0.5 μm; 100 % for particles > 0.75 μm (per ISO 21501-4 and JIS)

Concentration limit     > 710,000 / ft3 at 10 % coincidence loss

Light source     Long life laser diode

Zero count      < 1 count per 5 minutes (per ISO 21501-4 and JIS B9921)

Flow rate     50 l/min ± 5 % accuracy (meets ISO 21501-4 and JIS B9921)

Battery life     > 3 hours of continuous operation

Temperature Range     2 oC to 35 oC

Printer      Built-in thermal printer (also available without printer)

Warranty     Two years

TSI 9550 | Particle counter
TSI 9550 | Particle counter
The TSI 9550 particle counter (range 0.5 to 25 micron) comes complete with quick start guide, operating manual on CD, power supply, battery, barbed inlet, isokinetic probe, tripod, tubing, purge filter, printer paper, USB cable, and TrakPro Lite Secure software.

Support documents

  • Download
  • Category
  • File type
  • Download
Download
TSI 9510 9310 9350 9550 9500 quick start guide.pdf TSI 9510 9310 9350 9550 9500 quick start guide
Category
Technical document
File type
Adobe Acrobat
Download (657 KB)
Download
TSI 9510 9310 9350 9550 9500 user manual.pdf TSI 9510 9310 9350 9550 9500 user manual
Category
Technical document
File type
Adobe Acrobat
Download (2 MB)
Download
TSI AeroTrak 9350 and 9550 data sheet.pdf TSI AeroTrak 9350 and 9550 data sheet
Category
Technical document
File type
Adobe Acrobat
Download (189 KB)
Download
TSI AeroTrak accessories data sheet.pdf TSI AeroTrak accessories data sheet
Category
Technical document
File type
Adobe Acrobat
Download (551 KB)
Download
TSI TrakPro Lite data sheet.pdf TSI TrakPro Lite data sheet
Category
Technical document
File type
Adobe Acrobat
Download (2 MB)

Common customer questions & answers

QQuestion I have turned the unit on but I am unable to get the unit to read zero before I start my test, what's wrong?
AAnswer If the zero filter has been fitted to the unit,ensure that it has been screwed down tightly, this is the most common cause of erronious data. Alsoif the instrument has been transported between sites run the pumpfora couple of minutesto remove any loose particles that may be present within the system.
QQuestion How long will the unitrun on it’s own battery?
AAnswer On continuous running is approximately 3 hours .
QQuestion Does my particle counter comply with ISO 14644-1:2015?
AAnswer Yes, all current production instruments comply with the 2015 edition of ISO 14644. These all have version 2.6 or later of the instrument firmware, and older units can be upgraded to this if they are retured to BSRIA or to the manufacturer.
QQuestion Does my particle counter comply with ISO 14644-1:2015?
AAnswer Yes, all current production instruments comply with the 2015 edition of ISO 14644. These all have version 2.6 or later of the instrument firmware, and older units can be upgraded to this if they are retured to BSRIA or to the manufacturer.