Overview
Convector heaters used for producing a constant electrical / heat load of either 0.75, 1.25 or 2.0kW. These heaters are specially modified with additional switching that can override the thermostat allowing the units to produce a constant load. Ideal for use in the testing of IT Coms Rooms or rooms where a heat load needs to be maintained at a set level over a period of time by using a single or multiple heaters.
If the convector is to be used in the more conventional way with the thermostat override switch turned to the off position, this allows the heater to switch on and off via the thermostat when the selected temperature has been reached.
Technical
Voltage 220V – 240V (3 pin standard plug in)
Frequency 50Hz- 60Hz
Dimensions 570mm (w) x 400mm (h) x 100mm (d)
Temperature/ heat load settings A, 0.75kW B, 1.25kW C. 2.0kW D, Thermostat over ride (2.0kW)
Important safety note : If used with the thermostat overriden it is recommended that these heaters should not be left unattended during operation.