Close

Are you visiting bsria.com from outside your region? Visit your regional site for more relevant services and pricing.

Poddymeter 6200MF

Contact Instrument Solutions

Overview

Suitable for flow and differential pressure measurements across balancing valves and orifice plates in waterflow systems.

Flow rate can be displayed by inputting individual KVs values.

In "Flow" mode, both flow (in L/Sec) and DP (in KPa) are displayed.

In "Pressure mode" line pressure (in KPa) and DP (in KPa) are both displayed.

Features

  • Differential and line pressure in KPa
  • Flow in L/Sec with KVs input
  • Rugged transducer arrangement
  • Sealed unit – water resistant
  • Damped steady readings
  • Overpressure warning
  • Low battery warning
  • Hanging strap provided
  • Foam lined case for instrument,
  • Tubing & adaptor storage
  • Detachable quick release tubing & valves
  • Simple operation
  • Back light

Technical

Range line pressure      0 – 1000 KPa/ Resolution 1 KPa

Differential pressure      0 – 100.00 KPa/ Resolution 0.01 KPa

Flow      4 digits (floating decimal point) in L/Sec

KVs input range       0.5 - 2500

Maximum line & single port overpressure      10 BAR G

Accuracy      0 – 20 KPa : +/- 0.1 KPa, Over 20 KPa +/- 0.2 KPa or 0.5% whichever is greater

Batteries      4 x AA (Supplied)

Battery life      100 hours approximately

Transducer wetted parts      316 stainless steel

Instrument size & weight       27.5 x 11 x 4 cm ; 750 gm

Cased size & weight       40 x 30 x 9 cm ; 2.4 KG

Support documents

  • Download
  • Category
  • File type
  • Download
Download
Poddymeter 6200MF data sheet.pdf Poddymeter 6200MF data sheet
Category
Technical document
File type
Adobe Acrobat
Download (248 KB)

Common customer questions & answers

QQuestion Does the 6200MF come supplied with everything included ready to start testing?
AAnswer Yes, the kit comes with a set of hoses and binder fittings to connect to most value types.
QQuestion Does the 6200MF have KVs values stored in its memory?
AAnswer No, the KVs values will have to be inputted manually by the user to accuratley measure flow.