Close

Are you visiting bsria.com from outside your region? Visit your regional site for more relevant services and pricing.

Fluke 323 (bundle offer)

Contact Instrument Solutions

Overview

The Fluke 323 True RMS clamp meter is for general grab-and-go electrical troubleshooting needs. The instrument is ideally suited for current measurements up to 400 A in tight cable compartments with a maximum cable size of 30 mm in diameter. Supplied as standard with soft case and test leads.

Additional i200 (pictured) and i800 AC current clamps included as part of the bundle.

The i200 is a single range 200 A clamp-on AC Current Clamp with current output via safety shrouded banana plugs. The i200 is compatible with most Fluke multimeters or any other current measurement device that accepts shrouded banana plugs.

The Fluke i800 AC Current Clamp is designed for use with multimeters, recorders, safety testers, etc., for accurate non-intrusive AC current measurement. It extends the current measuring capability of a digital multimeter to 800 A AC (IMPORTANT NOTE - the 323 unit supplied in the bundle is only suitable for current measurements up to 400 A). It is compatible with digital mulitmeters that accepts shrouded 4 mm (0.16) banana plugs and has an AC milliamp range.

*** Excess stock *** Bundle available at an offer price of £150.00 (Ex. carriage and VAT). Please note only x1 unit and bundle items are available at special offer price ***

Features

323 Measurement capability

  • 400 A AC current measurement
  • 600 V AC and DC voltage measurement
  • True RMS AC voltage and current for accurate measurements on non-linear signals
  • Resistance measurement up to 40 kohm with continuity detection

323 Features

  • Slim, ergonomic design
  • CAT IV 300V/CAT III 600 V safety rating
  • Hold button
  • Soft carrying case

Technical

323

  • AC current range 400 A
  • AC current accuracy 2 % ± 5 digits (45 Hz to 65 Hz), 2.5 % ± 5 digits (65 Hz to 400 Hz)
  • AC voltage range 600 V
  • AC voltage accuracy 1.5 % ± 5 digits
  • Resistance range 400.0 ohm and 4000 ohm
  • Resistance accuracy 1.0 % ± 5 digits
  • Size H x W x D (mm) 207 x 75 x 34
  • Maximum wire diameter 30 mm (600 MCM)
  • Weight 265 g

i200

  • Nominal current range 200 A
  • Continuous current range 0.5 A - 200 A
  • Maximum non-destructive 240 A
  • Lowest measurable current 0.5 A
  • Basic accuracy 1 % + 0.5 A, (48 - 65 Hz), (% reading + floorspec)
  • Useable frequency 40 Hz - 10 kHz
  • Output level(s) 1 mA/A
  • Safety CAT III, 600 V
  • Maximum voltage 600 V AC
  • Maximum conductor diameter 20 mm
  • Maximum conductor size (busbar) 20 mm x 5 mm
  • Output cable length 1.5 m
  • Shrouded banana plugs Yes

i800

  • Nominal current range 800 A rms
  • Continuous current range 100 mA to 800 A rms
  • Maximum non-destructive current 1500 A rms (50/60 Hz)
  • Lowest measureable current 100 mA
  • Basic accuracy ± 1 % of reading
  • Useable frequency 30 Hz - 10 kHz (- 3 dB)
  • Output level(s) 1 mA / A
  • Safety CAT III 600 V
  • Maximum voltage 600 V AC rms or DC
  • Maximum conductor diameter 54 mm (2.13 in)
  • Output cable length 1.6 m (63 in)
  • Lead connector Shrouded banana plugs

Support documents

  • Download
  • Category
  • File type
  • Download
Download
Fluke i200 AC current clamp user manual.pdf Fluke i200 AC current clamp user manual
Category
Technical document
File type
Adobe Acrobat
Download (701 KB)
Download
Fluke i800 AC current clamp user manual.pdf Fluke i800 AC current clamp user manual
Category
Technical document
File type
Adobe Acrobat
Download (202 KB)
Download
Fluke 323 clamp meter user manual.pdf Fluke 323 clamp meter user manual
Category
Technical document
File type
Adobe Acrobat
Download (1 MB)