Concept Aerotech Smoke Wand | Smoke generator

Contact Instrument Solutions

Available to purchase is the Concept Aerotech Smoke Wand 230 V includes control box, swan neck probe (approximately 425 mm long), 2 x vaporiser tips, 3 x 500 ml bottles of smoke oil 135 and operating instructions.

Designed to facilitate the observation of air movements in many types of situations, Concept's Aerotech Smoke Generator is ideally suited for use in wind tunnels and indoor room flow tests.

It is easily transported to the site of investigation, is rapid and convenient to set up and is easy to use. The smoke is a stable and clearly defined plume up to 5 m in length and can be generated in an aerodynamically clean duct. The probe is shaped to minimise wake generation that would otherwise invalidate observations.

Features

The unit is easily transported, has a rapid warm up time and simple to set up and use, and produces a controllable, non hazardous smoke effect.

The Concept Aerotech Smoke Wand produces a point source of smoke on the end of a 425 mm long stainless steel "wand". Commonly used when a very precise point source of aerosol smoke is required.

The smoke is produced by peristaltically pumping an innocuous, medicinal quality white oil to the tip of a probe, where a low voltage electrical coil heats it to produce a dense plume of smoke, at exactly the point where it is needed.

The probe is shaped to minimise wake generation, ensuring that the smoke can be entrained into the airstream smoothly. A stable and clearly defined plume of smoke up to 5 m in length can be generated.

Variable controls to adjust smoke thickness and operating temperature.

Technical

Dimensions      35 cm x 40 cm x 20 cm

Weight      9.5 kg

Power Supply      230 V (or 110 V option)

Vaporiser Power Dissipation      90 w Max (30 V:3 A ac)

Warm up time from cold      3 minutes

Oil Consumption (average)      60 ml / hr

Fluid Capacity     400 ml max

Trailing connections (oil supply & electrical)      3 m

Concept Air Trace | Smoke generator
Concept Air Trace | Smoke generator
Concept Air Trace MK2 Kit Orange (75 W) battery system smoke generator, case, Pb battery, constant voltage Pb charger, 0.5 L smoke fluid, and manual

Support documents

  • Download
  • Category
  • File type
  • Download
Download
Concept Aerotech data sheet.pdf Concept Aerotech data sheet
Category
Technical document
File type
Adobe Acrobat
Download (1 MB)
Download
Concept Smoke Oil H&S data sheet.pdf Concept Smoke Oil H&S data sheet
Category
Technical document
File type
Adobe Acrobat
Download (1 MB)
Download
Concept Aerotech user manual.pdf Concept Aerotech user manual
Category
Technical document
File type
Adobe Acrobat
Download (2 MB)

Common customer questions & answers

QQuestion How is the smoke generated?
AAnswer The smoke is produced by peristaltically pumping an innocuous, medicinal quality white oil to the tip of a probe, where a low voltage electrical coil heats it to produce a dense plume of smoke, at exactly the point where it is needed.
QQuestion Can I adjust the the smoke output from the Aerotech?
AAnswer Yes, there are variable controls to the front of the unit that allow adjustment to the smoke thickness and operating temperature.